Tag Archives: 1000BASE-T SFP

Introduction to 10/100/1000BASE-T SFP Module

The SFP transceiver modules are hot-pluggable I/O devices that plug into module sockets. The transceiver connects the electrical circuitry of the module with the optical or copper network. There are many choices of SFP modules. You may see an SFP module labeled as 10/100/1000BASE-T SFP. As we know, 1000BASE-T is a standard for Gigabit Ethernet over copper wiring. How about 10/100/1000BASE-T SFP module? What is a 10/100/1000BASE-T SFP module? In this post, a brief introduction about 10/100/1000BASE-T SFP module will be given.

Overview

The 10/100/1000BASE-T SFP small form-factor pluggable (SFP) transceiver is based on the SFP Multi Source Agreement (MSA). It is a copper SFP supporting 10/100/1000BASE-T copper Ethernet standards. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. 10/100/1000BASE-T electrical SFP transceivers use an integrated RJ-45 connector with transformer and PHY IC. The link length is up to 100m over four pair Category 5 UTP cabling. With the hot pluggability, the module offers a flexible and easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online. Besides, this 10/100/1000Mbps SFP transceiver operates at wide temperature ranges and provides high performance. It is ideal for full-duplex Gigabit Ethernet connectivity to high-end workstations and wiring closets utilizing existing copper network infrastructure. And it provides a convenient way to add a copper connection to an SFP type switch that would typically be used for fiber SFPs. Picture below shows a Juniper EX-SFP-1GE-T SFP copper transceiver. It is a 10/100/1000BASE-T copper SFP, which is compliant with the Gigabit Ethernet standard as specified in IEEE STD 802.3 and can fully satisfy the 10/100/1000BASE-T application.

Juniper EX-SFP-1GE-T Compatible 10.100.1000BASE-T SFP Copper RJ-45 100m Transceiver

Key Features
  • Compliant with SFP Multi-Source Agreements standards (MSA)
  • 10/100/1000 Mbps Auto-Negotiation
  • Up to 1.25Gbps bidirectional data links
  • Hot-pluggable SFP footprint
  • Fully metallic enclosure for low EMI
  • Low power dissipation
  • Compact RJ-45 connector assembly
  • Access to physical layer IC via 2-wire serial bus
  • 10/100/1000 BASE-T operation in host systems with SGMII interface
  • Link length up to 100m with four pair UTP cabling
Applications

10/100/1000BASE-T SFP modules are extremely versatile, working with many equipment that support the SFP type of interface: Ethernet switches, routers and any other networking equipment. They support 10/100/1000 Mbps data-rate in excess of 100 meters and are ideally suited for implementing small form-factor Network Interface Cards (NICs) and uplinks. As such, it is highly appropriate for use in such high-density applications as LAN 10/100/1000BASE-T Fiber Channel, Gigabit Ethernet LAN switch applications, Gigabit Ethernet media converters, switch-to-switch interfaces, switch to switch SerDes interface, switch to switch SGMII interface, switched backplanes, gaming devices, router/server interfaces and other optical transmission systems.

Conclusion

Fiberstore offers a wide variety of SFP modules (T, TX, SX, LX, ZX, CWDM, DWDM and BiDi) to meet your requirements, for example, Meraki MA-SFP-1GB-TX compatible 1000BASE-TX SFP copper transceiver, and HP JD089B compatible 1000BASE-T SFP copper transceiver. Our SFP modules have been tested and guaranteed 100% compatible with various Ethernet switches from major manufacturers like Cisco, HP, Nortel, Extreme, or Netgear. Fiberstore optics are thoroughly tested and are subject to an extensive qualification process before being considered certified to work in modules and switches.

SFP Transceivers for Gigabit Ethernet Applications

SFP, small form-factor pluggable, a hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. It is a popular industry format jointly developed and supported by many network component vendors. SFP transceivers have a wide variety of transmitter and receiver types, which allows users to select the appropriate transceiver for their link needs. Several different categories of SFP modules will be introduced in this article.

1000BASE-SX SFP for Multimode Fibers

The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard and SFP Multi-Source Agreement (MSA) standards, is a cost effective transceiver module with a wavelength of 850nm which supports data rates of up to 1.25 Gbps. It operates on 50/125μm multimode fiber links up to 550m and on 62.5/125μm multimode fiber links up to 300m. It also can support up to 1km over laser-optimized 50μm multimode fiber cable. Its electrical interface is compliant with SFF-8431. And it supports Digital Diagnostic Monitoring (DDM). The following is a picture of TRENDnet TEG-MGBSX compatible 1000BASE-SX SFP transceiver.

TRENDnet TEG-MGBSX Compatible 1000BASE-SX Transceiver

1000BASE-LX/LH SFP for Both Multimode and Singlemode Fibers

The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, is similar with the other SFP transceivers in basic working principle and size. 1000BASE-LX/LH SFP can be used for both single-mode and multi-mode. It is single-mode by design, but when it gets together with its friend “mode conditioning patch cable”, it can also be used for multi-mode application. It operates on standard singlemode fiber optic link spans of up to 10km and up to 550m on multimode fibers. 1000BASE-LX/LH SFP transceiver is a high performance 1310nm transceiver for singlemode fibers. It supports dual data-rate of 1.25 Gbps/1.0625 Gbps. 1000BASE-LX/LH SFP transceiver is commonly applied for Gigabit Ethernet links, Fiber Channel Switch Infrastructure and other optical transmission systems. The following picture shows a Cisco SFP-GE-L compatible 1000BASE-LX/LH SFP transceiver module.

Cisco SFP-GE-L Compatible 1000BASE-LXLH SFP Transceiver

1000BASE-EX SFP for Long-Reach Singlemode Fibers

The 1000BASE-EX SFP operates on standard single-mode fiber-optic link spans of up to 40 km in length. An inline optical attenuator should be inserted between the fiber optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.

1000BASE-ZX SFP for Long-Reach Single-Mode Fibers

1000BASE-ZX SFP supports link length of up to 80km on single mode fiber at 1Gbps. The precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors. This optic works at 1550nm wavelength and uses an LC connector.

1000BASE-T SFP for Copper Networks

1000Base-T is an extension of standard Ethernet technologies to gigabit-level network speeds. 1000BASE-T SFP operates on four pairs of the commonly installed category 5 unshielded twisted pair (UTP) cable or enhanced category 5 cabling version of UTP cabling of link lengths up to 100m. The following picture shows an HP JD089B compatible 1000BASE-T SFP transceiver.

HP JD089B Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver

Summary

SFP transceivers are designed to support SONET, gigabit Ethernet, Fibre Channel, and other communications standards. Each optical interface operates and is managed like a fixed port but gives the customer flexibility to hot-swap or interchange to different optical module types. There is a number of 1000 BASE SFP optics from Fiberstore that are available depending on the customer application and distance capability required. Each optical interface operates and is managed like a fixed port but gives the customer flexibility to hotswap or interchange to different optical module types. Fiberstore optics are thoroughly tested and are subject to an extensive qualification process.